若要找回密码,请联系产品中心客服人员
电话:0571-0000000

修改密码

6-16位字符,包括英文字母、数字或符号 请再输入一次新登录密码
确认

产品中心

公司拥有八大系列60多个品种的产品,生产的"金鼠"系列产品广泛应用于建筑、汽车、机械、电子、电器、太阳能光伏等行业,不仅在国内赢得了良好口碑,而且远销欧洲、北美、南美、东南亚、中东等地区,多个产品获得省、部级科技大奖,并多次列入国家火炬计划,技术创新计划,在市场上享有很高的知名度和美誉度。

产品搜索 >
返回产品列表
  • JS-1184CC有机硅灌封胶

  • 照明行业
  • 透明
咨询服务热线0571-82392027

产品简介

产品特性/Products Features

JS-1184CC是一款透明缩合型双组分有机硅灌封胶,使用时按照10:1的重量比配比。产品固化时不放热,无腐蚀,固化速度快,固化后具有良好的透光性,耐高低温、耐老化等特点。

JS-1184CC is a transparent condensation type two-component silicone potting sealant, which is used according to the weight ratio of 10:1. It has good characters of non-corrosive ,fast curing and no heat release when curing. After curing, it has good light transmission, high and low temperature resistance, aging resistance and other characteristics.

产品用途/Applications

适用于LED硬灯条、驱动等的灌封,也适合工业各种电子器件的灌封,起到密封、防水、抗震等作用。

Suitable for filling and sealing of LED hard light strip, drive, etc.It is also suitable for filling and sealing all kinds of industrial electronic devices, playing the role of sealing, waterproof, seismic and so on.

典型技术参数/Typical Technical Data

blob.png

注:以上性能在标准环境条件下(23±2℃,50±5%)固化7天所测。

Note: the above performance data were measured in 23±2℃, 50±5% RH.

操作及安全/ Operation and safety

1、使用前清理干净灌封表面的灰尘、油污等。

2、混合时,应遵守A组分: B组分 = 10:1的重量比。

3、A组分与B组分混合,搅拌均匀即可,应避免高速长时间搅拌以防止操作时间缩短而加快固化。搅拌均匀后可静置脱泡或真空脱泡。

1. Clean and dry the surface, no grease.

2. During mixing, the weight ratio of component A: component B = 10:1 shall be observed.

3. Mix component A and component B well.High speed and long stirring time should be avoided to avoid shortening operation time and accelerating curing.Stir well and then defoaming or vacuum defoaming can be done.

颜色及包装/Color and Package

本产品为10L塑料桶和1L塑料壶的包装,或商定其他规格包装。

10L or 1L packing. Available customer tailored.

储存及有效期/Storage& Shelf life

本品属于非危险品,应在阴凉干燥的地方贮存,贮存温度在30℃以下,储存期6个月。

This product is non-dangerous.Store in a well ventilated and dry place and keep the temperature below 30 ℃. Shelf life6 months.