若要找回密码,请联系产品中心客服人员
电话:0571-0000000

修改密码

6-16位字符,包括英文字母、数字或符号 请再输入一次新登录密码
确认

产品中心

公司拥有八大系列60多个品种的产品,生产的"金鼠"系列产品广泛应用于建筑、汽车、机械、电子、电器、太阳能光伏等行业,不仅在国内赢得了良好口碑,而且远销欧洲、北美、南美、东南亚、中东等地区,多个产品获得省、部级科技大奖,并多次列入国家火炬计划,技术创新计划,在市场上享有很高的知名度和美誉度。

产品搜索 >
返回产品列表
  • JS-1184缩合型有机硅灌封胶

  • 照明行业
  • 白色或黑色
咨询服务热线0571-82392027

产品简介

产品特性/Products Features

1、室温固化,固化快速快,生产效率高,易于使用;

2、在很宽的温度范围(-40℃~150℃)内保持橡胶弹性,电性能优异,导热性较好;

3、防水防潮,耐化学介质,耐黄变,耐气候老化25年以上;

4、与PC、PVC、ABS、PPO等材料粘附性良好;

1. Room temperature curing,fast curing and operation easily with hig productivity.

2. Can be used in -40℃ ~150℃ work environment,excellent electrical insulation and thermal conductivity.

3. Waterproof and dampproof,chemical resistance,resistance to yellowing and weather resistance,the working life is more than 25 years.

4.Good adhesion to PC,PVC,ABS,PPO ect.

产品用途/Applications

JS-1184是一款双组分缩合型有机硅灌封胶,该产品固化是不放热、无腐蚀、收缩率小、固化速度快等特点、适用于光伏组件接线盒、电子元器件、电源等的灌封保护。

JS-1184 is a two-component condensation type silicone potting sealant. It has good characters of non-corrosive ,low shrinkage,fast curing and no heat release when curing. The pouring sealant is insulative and suitable for solar PV module junction box pouring sealant ,thermal conductive,sealing of different electronic components. 

典型技术参数/Typical Technical Data

blob.png

注:以上性能在标准环境条件下(23±2℃,50±5%)固化7天所测。

Note: the above performance under standard conditions (23 + 2 ℃, 50 + / - 5%) measured 7 days curing.

操作及安全/ Operation and safety

1、清理干净灌封表面,除去油污;

2、为了确保填料的均匀分布,先将A、B组分分别搅拌均匀;

3、按配比将A、B组份在混合罐中混合均匀,最好抽真空脱泡5分钟左右,并在操作时间内完成灌封;

4、灌封好的制件置于室温下固化,初固后可进入下道工序,室温条件下一般需3小时左右固化;

5、建议使用专用灌封胶设备进行施胶.

1. Clean and dry the surface, no grease.

2. To ensure the filler dispersed well, mixing A and B separately before using.

3. Mix A and B components evenly in the mixing tank according to the proportion. It is better to vacuum and defoaming for about 5 minutes and complete the filling and sealing within the operation time.

4. The products Cured in room temperature, you can proceed next step when the pouring sealant not flow.The pouring sealant will cure completely in 3 hours, it will decrease curing time in summer and extendcuring time in winter.

5. Special potting equipment is suggested to use.

颜色及包装/Color and Package

常规颜色有白色、黑色,还可按照客户要求生产特种颜色,采用11kg/组或12kg/组的包装。

Black, white, available customer tailored, in 12kg or 14kg packing.

储存及有效期/Storage& Shelf life

本品属于非危险品。

推荐贮存温度:存放于通风良好干燥的地方,保存环境温度低于30℃。

保质期:6个月

长时间存放后,胶中的填料会有所沉降,请搅拌均匀后使用,不影响性能。

This product is non-dangerous.

Recommended storage temperature:Store in a well ventilated and dry place and keep the temperature below 30℃.

Shelf life:6 months.

After a long time storage, the filling in the encapsulant will settle, please stir it evenly before use, without affecting the performance.